Skip to main content
English    |    Français

Independent (Remote) Datalogging

In logging mode, wireless sensors collect data to their onboard memory for hours, days, weeks or even months at a time without needing to be connected to a computer, tablet, Chromebook or smartphone.

When the experiment concludes, simply connect the sensor to a device running PASCO software and download all the measurements it recorded.

How much does a windshield screen affect the temperature inside a car on a hot day? Using Wireless Temperature Sensors in logging mode makes it easy to find out.

 

Set up remote logging

Collect data directly on a Wireless Sensor instead of a computer or mobile device.

Note: Remote Logging is only available for PASCO Wireless Sensors.

  1. Open SPARKvue or click then select Start New Experiment.
  2. Click Remote Logging:
  3. Turn on the sensor then click the sensor which matches the device ID.

  4. Configure remote logging for each sensor:
      1. Select a sensor to configure from the Sensor menu.
      2. Toggle Sensor Enabled to Off if you don’t want to log data with this sensor.
      3. Set the Sample Rate using the left and right arrows. Toggle Common Sample Rate to Off to set different sample rates for each sensor.

    Tip: The configuration window indicates the amount of time that the sensor can log data below the sample rate. To increase the logging time:

      • Decrease the sample rate.
      • Disable unused sensors.
  5. Optional: Toggle Sensor Button Deferred Logging to On to start data logging by pressing the power button on the sensor.
  6. Click OK.

Data logging begins immediately after you click OK or press the power button on the sensor (if you selected Sensor Button Deferred Logging). The Bluetooth status light blinks yellow and green until data logging begins. When the sensor starts logging data, the Bluetooth status light blinks yellow.

Click OK and close SPARKvue. To stop data logging, turn off the sensor or connect it to SPARKvue to download the data.

Download remotely logged data

Download data remotely logged on a Wireless Sensor for data analysis. You can download the data to multiple devices as long as data isn’t deleted from the sensor after downloading it.

  1. Open SPARKvue or click then select Start New Experiment.
  2. Click Remote Logging .
  3. Turn on the sensor or press the power button if the sensor is currently logging.
    Note: The sensor doesn’t appear in Wireless Devices when the Bluetooth status light blinks yellow. Press the power button to make the sensor appear.
    Tip: Connect the sensor using USB, if available, to download data at a faster rate.
  4. Select the sensor under Sensors with data.
  5. In the Logged Data window, select Download Data.
  6. Select a method to download the data:
    • Templates
      Use this method to download the data into a new file.

      1. In the Select Measurements for Templates panel, select up to three measurements to display.
      2. In the Templates panel, select a template or a Quick Start Experiment to display the selected measurements.
    • Quick Start Experiments
      Use this method to download the data to a new Quick Start Experiment file. Names of Quick Start Experiments appear if available for the connected sensor.

      Select a Quick Start Experiment from the list, if available.

    • Add to existing experiment
      Use this method to download the data to an existing experiment file.

      1. Click Open PASCO Experiment or Open Saved Experiment.
      2. Select a file to open.

 

The PASCO Bluetooth Spectrometer: Even Isaac Newton would flip over the power of this digital prism!

Reposted from the NSTA Blog, original article can be found here.

The PASCO Wireless Spectrometer

Simply put, constructivism is a theory of knowledge that argues that humans generate knowledge and meaning from an interaction between their experiences and their ideas. So it follows that nothing is can be more constructivist than exploring the theoretical with real-time tools that measure the invisible. And the PASCO Wireless Spectrometer is just such a tool.

One of the most amazing things about the PASCO Wireless Spectrometer is that it does exactly what you would want it to do; show you the invisible with ease, simplicity, and leave behind a useful digital paper trail of graphs and charts. Although the main purpose of the PASCO Wireless Spectrometer was “specifically designed for introductory spectroscopy experiments” it actually goes farther than that. Much farther. Much much farther!

This trio of teachers, two from China and one from Mongolia have limited English speaking skills, but instantly understood the iPad app and PASCO Wireless Spectrometer. Seems that light is also a universal language.

The physics and electronics behind the PASCO Wireless Spectrometer are straight forward. The output is clear and obvious. And the mobility aspect is unprecedented. In other words, it does what it should how it should. Amazing enough on its own, but in true paradigm shifting fashion the PASCO Wireless Spectrometer presents the invisible world of visible light in the magical cartoon chart we’ve seen only in static textbooks for most of our lives. It’s as if the dinosaur skeletons in dusty museums suddenly came alive and reacted to the world.

Visible light, or the light our human eyes sense and convert to electrical impulses to our brains, only encompass a tiny fraction of the electromagnetic spectrum. Wavelengths between 390-700 nanometers, or from the short blue/violet waves to the longer orange/red ones with green and yellow in the middle. Infrared waves are just a little too long for us to see, and ultraviolet ones are a little too short. Even longer are radio waves, and even shorter are x-rays. The PASCO Wireless Spectrometer has a range of 380 to 950 nanometers meaning it can “see” a little into the ultraviolet and a lot into the infrared.

An ultraviolet light spikes the graph just outside the shortest wavelength we can see with our eyes.

Where this all comes together is that when the PASCO Wireless Spectrometer and various light sources are manipulated with our hands, the extended visible spectrum becomes something we can explore with the same cognitive dexterity as the microscope affords us in biology. When used in the classroom for demonstrations and explorations, the PASCO Wireless Spectrometer literally lets “humans generate knowledge and meaning from an interaction between their experiences and their ideas.” So yes, the PASCO Wireless Spectrometer is the epitome of constructivist theory into educational practice.

Isaac Newton

Although Isaac Newton is credited with discovering the inner workings of visible light back in the latter 1600s, the basic concept behind a rainbow was suggested by Roger Bacon 400 years earlier who in turn drew upon the works of Claudius Ptolemy a millennium before, and even Aristotle another 300 years before that.

Roger Bacon

Claudius Ptolemy

Aristotle

As a quick digression here, the Newtonian physics behind the PASCO Wireless Spectrometer has roots much more than five times deeper into the past than Mr. Newton’s distance in time is from us right now. Sorry to go all Einstein on you, but the individual colors of visible light that Newton coaxed out of sunlight with only a glass triangle, and then reassembled with nothing more than a companion prism was like yesterday.  Yet the attempts to explain the phenomena were first floated last week.

And now to think that within the palm of a student’s hand and the screen of their iPad is a gift of knowledge as great as the discovery itself. A stretch? Perhaps, but unless a scientific concept can be truly understood to the point one can make personal meaning out of the discovery, memorized facts are little more than coins used to buy grades.
Technically speaking, the PASCO Wireless Spectrometer is a battery operated spectrometer that uses Bluetooth wireless or a USB wire in order to communicate with a computing device running the necessary software. With its own built-in LED-boosted tungsten light source and three nanometer resolution, the PASCO Wireless Spectrometer provides an exceptional tool for traditional experimentation with pl
enty of room left over to inspect rarely explored specimens of light scattered throughout our lives.
The operation of PASCO’s unassuming black brick puts the power of spectrometry into the hands of grade school students and Ph.D. candidates alike. While maybe not the most durable block in the scientific toy box, the PASCO Wireless Spectrometer does offer a level of simplicity (when desired) as easy to use as  glass prism and sunlight. Of course you can do much more with the PASCO Wireless Spectrometer, but you don’t have to in order to get your money’s worth. This spectrometer does so much so well so easily that it literally rewrites lesson plans just by walking into the classroom.
On a higher level, the PASCO Wireless Spectrometer can be used in chemical experiments of intensity, absorbance, transmittance and fluorescence all while using a device that, according to PASCO, has light pass through the solution and a diffraction grating and then a CCD array detects the light for collection and analysis. Sounds simple enough just like a digital prism should. Except this one gives about nine hours of service per battery charge.
In the off chance that the battery fails, it is user-replaceable. in the off chance the light burns out, it is user-replaceable. And in the likely chance that liquid from a cuvette spills into the holder, a drain hole limits the damage, and cleaning the holder is user-serviceable with a cotton swab and deionized water.

A portable studio light is used to provide a background of predictable photons in order to explore the absorbance properties of various types of matter including sunglasses, polarizers, fabric, and theater lighting filters.

The PASCO Wireless Spectrometer must interface with a computer or tablet. Both Mac and Windows are supported as is iOS and Android.
You can download the Spectrometer user guide here.
PASCO also suggests using the Wireless Spectrometer for the following popular labs:
  • Absorbance and transmittance spectra
  • Beer’s Law: concentration and absorbance
  • Kinetics
  • Fluorescence
  • Photosynthesis with DPIP
  • Absorption spectra of plant pigments
  • Concentration of proteins in solution
  • Rate of enzyme-catalyzed reactions
  • Growth of cell cultures
  • Light intensity across the visible spectrum
  • Emission spectra of light sources
  • Match known spectra with references
And PASCO also provides several sample labs for plug-and-play directly into the chemistry classroom. But the really exciting plug-and-play option is the accessory fiber optic probe. With no more effort than sliding a faux cuvette into the receiving slot on the spectrometer, a meter-long fiber cord moves a directional sensor out into the wild where it can capture photons from all kinds critters. Some of my favorite animals include UV lights, filtered lightbulbs, various school lighting sources, sunlight though sunglasses, polarizers, and pretty much any LED flashlight I can find, especially the really good ones.
Although the screen output from the PASCO Wireless Spectrometer’s software is a graphical representation of a physical property, it takes almost no mental gymnastics to understand the changes to the graph once your mind is oriented to the display. The color-coded background and gesture-ready scaling provides an exceptionally smooth relationship with the data to the point all the hardware and software disappear leaving only the experiment and the results. And in my book, that kind of invisibility is the true measure of success with a teaching product.
When teaching the next generation about the important discoveries of the past generations, we have an obligation to use the most powerful educational tools possible. The PASCO Wireless Spectrometer is truly 100% pure constructivism-in-a-box. It turns experiences and ideas into personal meaning. Battery included and no wires necessary.
This entry was posted in NSTA Recommends: Technology, Science 2.0 and tagged Spectrometer, wireless.

PASCO Capstone 2 Software

CAPSTONE 2.0 is out now! Free Upgrade for Capstone 1.x users!

Updated with new tools! Designed specifically to collect, display and analyze data in physics and engineering labs.

Features for Capstone 2.0!

Blockly Coding

Helps Students Develop Computational Thinking Skills

Physics educators want more experimental control and programming access to all PASCO interfaces and sensors. Students need tools to develop creative programing and problem solving skills in science. Blockly coding has been built into Capstone 2, giving teachers and students the tools they need to develop these skills.

With PASCO Capstone In Your Lab:

  • Apply coding concepts to your labs
  • Create new sampling conditions
  • Design Sense and Control experiments
  • Create whatever experiment you or your students can dream up!
Capstone Blockly Graph

Trials Table – Coming in 2020!

Capstone Trials TableYou never take only one run in science. You take multiple runs and calculate averages. Next, you vary a parameter while holding the other constant; again, taking more runs and calculating averages. Most software data tables don’t actually allow this to be done easily.

The Capstone Trials Table was created for how data is collected in the science lab and allows for the kind of analysis students need to perform.

  • Organize your data to easily define physical relationships
  • Track variables
  • Average runs
  • Plot derived values

Capstone Mass of PendulumUsing the simple pendulum lab as an example, students will time a simple pendulum under various conditions. They will vary the mass, length, and starting angle. The Capstone Trials Table allows you to vary and keep track of experimental parameters between trials and runs taken in each trial. You can also keep track of statistics for averaged runs and experimental error.

Real-world Science

Scientists always take multiple runs and calculate averages. Next, they vary a parameter while holding the others constant; again, taking more runs and calculating averages. Most software data tables don’t support this and require data export and processing… until Capstone 2.

The Capstone Trials Table was created to reflect how data is collected in science labs. It supports the analysis students need to develop critical thinking skills and interpret the data.

With Capstone students can:

  • Organize data to easily define variable relationships
  • Track multiple variables
  • Average runs within a trial group
  • Plot derived values (such as an average of runs vs. a group parameter)

For example, in the Simple Pendulum lab, students time a pendulum under different conditions by varying the mass, length, and starting angle. The Capstone Trials Table allows you to manipulate variables and track experimental data between trials and runs. You can also keep track of statistics for averaged runs and experimental error.


Graph Pop-Up Tools

Now, whenever tools are activated, the most common actions will be easily accessible on the graph. The pop-up tools allow for easy access to tool features and options.

Capstone Graph Pop-up Tools


Circuits Emulation

Reinforce circuit concepts and tackle student misconceptions using circuit visualization. Combine real-world circuits with simulations, animation, and live measurements. Drag components from the components list, then rotate them and connect pieces together by drawing wires.

With the Circuits Emulation tool in Capstone 2, you can:

  • Construct and modify circuits
  • Show conventional current and electron flow animation
  • Animate circuits with live sensor data

Drag components out from the components list. Rotate components and connect pieces together by drawing wires.

Capstone Circuits Emulation Screen Example

The Physics of Kawhi Leonard’s Incredible Buzzer Beater

It was the shot heard across Canada.  There were a lot of factors that made Kawhi’s buzzer beating basket so remarkable.  Aside from there being no time left on the clock and the weight of a sport’s nation on his shoulders, Kawhi had to overcome the backward momentum that is inherent in a ‘fadeaway’.  The purpose of a fadeway is to create space between the shooter and defender(s), which was a necessity for Kawhi as there were several seriously tall 76ers trying to screen his shot.

Over-coming the fadeway’s backwards momentum is no easy feat as it requires players to quickly calibrate in their minds the additional force that is required to successfully sink a basket, which for most mere mortals is not intuitive.  The shot is so challenging that only a handful of NBA basketball players have been able to reliably make this shot; and we’re talking the great players such as Michael Jordan, Lebron James, Kobe Bryant and of course Kawhi Leonard.

The video below provides an extreme example of backwards momentum with a soccer ball shot from the back of a truck

Investigating Kawhi Leonard’s shot in the lab

In addition to backwards momentum there were many additional physical factors at play such as the angle of the shot and gravity.  Investigating all these forces in a single activity would not be practical.  Fortunately most of these forces can be isolated and explored in the lab using PASCO sensors, software and/or equipment.

Exploring The fadeaway’s negative momentum using PASCO

PASCO offers an intriguing and affordable solution to model the dramatic effect of a fadeaway’s negative momentum on projectile distance.  PASCO’s mini launcher will consistently launch projectile balls the same horizontal distance for a set angle, assuming that the launcher is stationary.  If however, the launcher is placed on PASCO’s frictionless cart, the force of pulling the trigger will cause the cart to move backwards at a velocity that can be measured using the motion sensor.  Students will be surprised to see that even though the cart travels just a few centimeters, the overall projectile distance is significantly reduced.  This can be a very simple demonstration or an in-depth quantitative analysis that factors in the projectiles initial angle and velocity, the time of flight and even the k-constant of the spring.

Other Forces Affecting a Basketball Shot

Momentum and Explosions

When a basketball player takes a jump shot (as with a fadeway), the player and the ball could be viewed as 2-object linear system if you ignore other outside forces such as gravity.  What’s interesting, and perhaps not apparent to many students, is that the basketball will exert an equivalent force to the player as the player is exerting on the basketball (Newton’s 3rd Law).  Of course because of the very significant inertia (mass) difference between the two objects, the basketball will accelerate at a much fast rate than the player.  The player however will experience some acceleration in the opposite direction to that of the basketball.

Using Smart Carts to explore Momentum and Explosions (Free Lab)

The Wireless Smart Carts are equipped with an exploding plunger.  Multiple 250g bars can be added to one cart to skew the masses.  The velocities of both carts are measured using the cart’s internal position sensors enabling students to determine that momentum is conserved in a linear exploding system.

ME-1240 Smart Cart (Red)

ME-1241 Smart Cart (Blue)

ME-6757A Cart Mass (set of 2)

Newton’s Third Law

The player’s force on the basketball will be equal to the opposing force of the basketball onto the player.  Of course most students will consider this a ridiculous proposition until they prove this for themselves.

Using Smart Carts to explore Newton’s Third Law

There are several ways the carts can be used.  The simplest activity is for two students to have a tug-of-war using the internal force sensors of two Smart Carts and an elastic band as depicted in the image.  The equal but opposite forces will be confirmed, however in relation to a basketball player taking a shot, it has some shortcomings as the forces are pulling as oppose to pushing.

An equally simple activity, and one more relevant to the basketball shot scenario, is to collide two Smart Carts (with magnetic bumpers attached to their force sensors).  As both carts have equivalent masses, students may not be surprised to see the impact forces are identical.  However, what will probably surprise your students, are the force measurements that occur during a collision when one cart is weighed down with one or more 250g masses.  Using their intuition, most students will speculate that one of the carts will experience a much greater force than the other.  Of course, Newton’s 3rd Law will triumph and the forces will be identical.

 

 

Gravity

What goes up must come down.  This is true of course for all earth bound objects (including basketballs) due to the ever present force of gravity.  Without gravity the trajectory of a basketball player’s shot would be straight to the ceiling of the arena, where most of the fans would be viewing the game.

Exploring the accelerating force of gravity using the Motion sensor

PASCO offers several technologies and techniques for measuring gravity including the Wireless Smart Gate and Picket Fence and the new Freefall apparatus.  Both of these techniques are accurate and precise means to measure gravity.  A third technique and one more appropriate for relating to a basketball shot is to measure the position of a vertically tossed ball and then have the software derive an acceleration graph from this data.  Statistics, including the Mean of the acceleration plot can be calculated by the software for the period when the ball was in freefall as shown in the graph.

 

 

 

 

 

 

 

 

 

 

 

The average acceleration in the free fall period is approximately -9.5 m/s/s

 

 

Included Products:

SPARKvue 4.0

SPARKvue makes data collection and analysis easier than ever before with cross-platform compatibility on Chromebooks™, iOS, Android™, Windows®, and Mac®, or on our standalone datalogger, the SPARK LXi.

Why SPARKvue?

SPARKvue makes data collection, analysis, and sharing quick and easy on every platform. Compatible with all of PASCO’s wireless and PASPORT sensors, students can quickly set up their lab, or use a built-in Quick Start Lab and begin collecting data immediately. SPARKvue is for all sciences and grade levels. However, if you’re an advanced user looking for more capabilities such as video analysis, advanced statistics and calculations, and greater customization of data displays on a PC or Mac®, then check out our PASCO Capstone™ software.

Since SPARKvue was first released, it has been winning awards, and we never stop improving it. With the latest major release of SPARKvue 4, we’ve continued to add features without adding complexity. A new Welcome Screen makes it easy to get started and discover SPARKvue’s capabilities. Whether you want to add data manually, use sensors for real-time or remote logging, or open one of the hundreds of existing labs, this is your starting place.

SPARKvue Landing Page Example

Data Collection

Using a USB or an interface, with SPARKvue you can just plug-and-play with nearly one-hundred sensors via Bluetooth®, which pairs wireless sensors through a simple in-app list (no system settings are required). PASCO understands that classrooms and labs can be hectic, so SPARKvue allows you to simply select a sensor from the sorted list (the closest sensors are first) and match a 6-digit laser-etched ID number to get connected. This method works even when there are dozens of Bluetooth sensors in the same lab.

Once you’ve selected a sensor, choose from a template or QuickStart Experiment, or you can build a page to meet your needs. SPARKvue is designed for inquiry, and students are not constrained to a few pre-selected layouts… the software can support expanding capabilities with ease.

SPARKvue Connection Screen Example
SPARKvue Template Screen Example

Collecting and visualizing data is easy with an array of displays, and the tools you need for analysis are right at your fingertips. Students can annotate data, apply curve fits, compare runs, create calculations, and much more! In-context tools make it simple to find what you’re looking for, which means that students spend their time learning the science, not the software.

SPARKvue Data Screen ExampleWhether you’re teaching K–8, high school, or college students, SPARKvue has the displays and tools you need to collect and analyze data. The basics you’d expect (such as digits, meter, graph, and table) are all included, but you will also find FFT, bar graphs, map display, embedded assessment questions, video playback, image capture, and analysis, as well as space for text and images. The labs you can build are only limited by your time and creativity.

Data Sharing and Export

When it’s time for students to submit their work, SPARKvue supports a variety of formats, and its export tools make it easy for educators. Students can easily snapshot their work in SPARKvue and submit an image, export the data to a .csv file to work in a spreadsheet, or save it in our .spklab format when they can come back and do more work in the future. SPARKvue also supports many other apps for saving or sharing data, including Google Drive on Chromebooks™.

SPARKvue Sharing Screen ExampleIf students are collaborating on a lab activity across devices, they can set up a shared session and stream results in real-time. Then, when the session is over, each student will have a copy of the data to analyze independently. These sessions can be set up in seconds within a student group, or the entire class can share the data from a teacher demonstration.

SPARKvue Data Screen Example

Data Collection

  • Live Data Bar: See sensor readings before you start sampling.
  • Periodic sampling: Automatic sampling proceeds at a fixed rate.
  • Manual sampling: Saves data only when a user specifies.

Data Displays

  • Graph, including multiple plot areas and axes.
  • Digits
  • Meter
  • Data Tables
  • FFT
  • Map Display
  • Bar Graph
  • Weather Dashboard (when used with the Wireless Weather Sensor with GPS)

Analysis Tools

  • Scale-to-fit: Adjust axis for optimal view of the data.
  • Data Selection: Easily select a portion of the data for analysis.
  • Prediction Tool: Visualize a prediction alongside the data.
  • Smart Tool: Find data point coordinates and calculate delta values.
  • Calculations Tools for Statistics: Easily get basic statistics (min/max/mean) and more.
  • Slope Tool: Find the slope of a point.
  • Curve Fits: 10 different curve fits with goodness of fit values.
  • User Annotation: Easily add text annotations to runs or points.
  • Easily add a y-axis or a new plot area.
SPARKvue Data Collection Example
SPARKvue Data Collection Example

Designed for Science Learning

  • Convenient annotation, snapshot, and electronic journaling are among the features that support peer dialogue, classroom presentations, and assessment.
  • Create and export electronic student lab journals.
  • Integrated with cloud-based file-sharing services such as Google Drive, Dropbox, and more.

The Same User Experience Across:

  • Computers
  • Chromebooks™
  • Tablets
  • Smartphones
  • PASCO dataloggers

More Features

SPARKvue Graph Data Screen

Graph data from a sensor & see the results in real-time.

SPARKvue Meter Screen

A Bar Graph used to investigate absorbance.

SPARKvue Boyles Law Screen

Boyle’s Law using both manually entered & sensor data.

SPARKvue Weather Dashboard Screen

Weather dashboard to monitor atmospheric conditions.

SPARKvue Choose a Path Screen

The new entry screen makes getting started even easier. Choose from three entry paths.

Download:

Download the latest update or give it a try for free.

Windows® Computers

  • Filename: SPARKvue-4.3.0.10.exe
  • Filesize: 250.32 MB
  • Version: 4.3.0
  • Released: Dec 13th, 2019

Download Free Trial Download Update

Mac® Computers

  • Filename: SPARKvue-4.3.0.10.dmg
  • Filesize: 132.67 MB
  • Version: 4.3.0
  • Released: Dec 13th, 2019

Free Apps for iPhones, iPads, Android tablets and Chromebooks

These SPARKvue apps provide the complete software install so that the user experience is the same regardless of platform. Updates for these apps are handled via direct notification and installation on your device, including SPARK LX/LXi users.


System Requirements

Windows
  • Windows 7 SP1 or later
  • Processor: 2 GHz or greater
  • RAM: 2 GB or greater
  • Disk Space: 459 MB or greater
  • Resolution: 1024 x 768 or greater
Mac
  • Mac OS X v 10.11 or later
  • Processor: 1 GHz or greater
  • RAM: 2 GB or greater
  • Disk Space: 202 MB or greater
  • Resolution: 1024 X 768 or greater
Chromebook
  • Chrome OS v70 or later
iOS
  • iOS v9 or later. Compatible with iPhone, iPad, and iPod touch.
Android
  • Android v5.0 or later. Compatible with tablets or phones.

About The Free Trial

  • This is a fully-functional 60-day free trial of SPARKvue software for Windows or Mac Computers.
  • After the 60 day trial, a licensed version of SPARKvue will be required to continue.
  • The full version of SPARKvue is also available as a free app for iPads, Android tablets, and Chromebook devices.

The Effect of Learning Through Inquiry: A Blog Series

Who am I?

Hello World! My name is Maayan, and I am another co-op student at AYVA. I’m currently studying biochemistry at the University of Guelph, which is how I ended up on the AYVA Team. A bit more about me: I do not have any cute pets, but I do have two younger brothers. I’m interested in science, especially all the cool discoveries that can be made to improve the human condition. Outer space is rad. I can talk about Mars colonies for hours on end.

How did I get into science?

As a wonderfully sweet little child, I frequently stole my brothers’ toys. I built Lego castles, controlled toy cars, and appropriated (stole) puzzles by the box. I liked building things, and I liked breaking things down to see how they worked. As I continued to grow into an adolescent, I enjoyed reading science fiction, enough to finish all the books my school library had.

Eventually, as I skipped on through life, I was assigned to do a school project on an important Canadian. I chose Julie Payette, an astronaut (and currently the Governor-General), and my interest was born. It was amazing to me that people had gone to the moon, and now different countries were collaborating on the International Space Station for scientific research. For the first time, I felt that people could come together for a cause to further humanity. The five-dollar bill is still my favorite: it has the Canadarm2 and the astronaut on it. To this day, I smile whenever I see one.

In high school I realized that astronauts couldn’t have gotten to space without a team of people down on earth who helped solve problems, and just because their jobs were less flashy (and got less camera time) it did not mean that they were any less important. Anyway, I liked biology (humans!) and enjoyed learning chemistry (and about the universe). I couldn’t decide which one I liked better, so biochemistry is the major I chose. No one seemed to be offering xenobiology or astrobiology courses at the time, but I hope someday they will.

What’s Next?

Back to the blog, I will be writing a few articles on teaching science through inquiry. This is important for future STEM-ists since teaching STEM is only a step before understanding STEM. After all, every inventor, scientist, engineer, mathematician, technologist, and astronaut started as a student.

Nice to meet you, and I hope to write again soon,

Maayan

Inquiry Learning Helps Keep Students in STEM

The use of technology in STEM education is quite important because it supports inquiry learning. With the newest innovations from science equipment companies such as PASCO, there are even more ways to support inquiry using hands-on learning. In several independent studies, using inquiry-based learning has improved student confidence, interest, and performance in physical sciences.

The Impact of Inquiry Learning for Science Students

One study in Thailand by Tanahoung, Chitaree, Soankwan, Manjula and Johnston (2009) compared two first year introductory physics classes at the same university. One class was taught using a traditional method while the other class used Interactive Lecture Demonstrations. Interactive Lecture Demonstrations is a form of inquiry; students first predict the outcome of an experiment individually and then in groups. The demonstration is performed in real-time using micro-computer based laboratory tools (in this case a PASCO interface and a temperature sensor) and then students and/or instructor reflect on the concept based on their predictions and the actual results. For each thermodynamics concept, a pre-lecture and a post-lecture test was administered for comparison.

Tanahoung et al. found that in almost all of the concepts, there was a greater increased of percentage of correct answers between tests from the experimental group than the control group. These results show that teaching methods that use inquiry and technology are a novel and viable pedagogy for the 21st century.

Inquiry-based learning has been shown to improve grades in physical science courses for non-STEM students. In one particular study by Hemraj-Benny and Beckford (2014), a chemistry concepts such as light and matter was taught in relation to visual arts using a combination of traditional lectures and inquiry activities. The experimental group participated in group discussions, performed experiments using worksheets, created presentations, and had a summary lecture from the instructor. In contrast, the control group only had lecture-style lessons in which the instructor went over PowerPoint slides and certain scientific experiments in detail.

As a result, the class that received both inquiry and traditional lessons performed better in their final exam than the control group. More students in the experimental group reported better confidence and less fear in science than the control. Interestingly, Heraj and Beckford found that both the control and experimental group reported to have a greater appreciation of the scientific world after completing this course. Overall, this experiment shows that inquiry methods are especially beneficial for non-STEM students in understanding physical sciences. The critical skills taught in this course is an excellent example of how STEM skills can benefit everyone, including non-STEM majors.

The use of personal multifunctional chemical analysis systems has greatly improved student perception on chemistry experiments. As reported by Vanatta, Richard-Babb, and Solomon (2010), West Virgina University switched to the PASCO SPARK learning system and reported several benefits to using such systems like “less ‘waiting around time’” (Vannatta, Richard-Babb & Solomon, 2010, p. 772), the possibility of interdisciplinary and field experiments due to the versatility of using such equipment. Such as portability, ease of use and using microcomputer-based laboratories allows students to move at their own pace instead of waiting for others to move on. All of these benefits are factors to increased student retention and interest in chemistry majors.

Additionally, PASCO has upgraded from the portable SPARK learning system with built-in software to the downloadable SPARKvue software for computers and mobile devices. In another study, Priest, Pyke, and Williamson (2014) compare student perception using a handheld datalogger (the PASCO GLX system) versus SPARKvue on a laptop for the same chemistry experiment. Students were surveyed after using the GLX system for a vapour pressure experiment on their opinion on the lab. The next year, the school had phased out the GLX system and introduced SPARKvue using a laptop interface but kept the lab exactly the same. Researchers noticed more positive responses to the experiment when students used the laptop interface. Students perceived that the experiment was simpler and that the content was easier to understand when using SPARKvue because students are more familiar with a laptop and not a traditional datalogger, they experienced less frustration and spent less time learning how to use the necessary software to gather data.

A Guided Inquiry Lab – Results May Vary!

In my own studies, I benefited from inquiry labs and technology definitely made these labs easier. One of my favourite labs was a dart gun experiment where our groups were challenged to determine the theoretical spring constant of a dollar store dart gun by devising our own method. The goal of the experiment wasn’t to determine the actual spring constant since there weren’t actual springs in the dart gun, but to use what we knew from other units to create an experiment. We were given free reign over all the equipment in the classroom including the PASCO GLX and motion sensor and needed to keep a lab notebook in order to note any changes to the experimental method.

My partner and I opted for a low-tech option (pictured right) – we weighed the dart and determined the maximum height of its flight upwards so we could plug it into a kinematics equation to find the vertical velocity of the dart when it exited the chamber. This method was sort of tedious – I would launch the dart from the floor while my friend would video the dart on her phone while standing on a chair so we could replay and record when it reaches maximum height. This resulted in a few mishaps such as the dart perfectly falling into the adjacent broken glass box which we promptly moved. We also had to make several modifications to our experiment design to ensure that our data collection was consistent such as taping the dart gun so it exits perpendicular to the ground and adding weight to the dart gun so it doesn’t hit the ceiling before it reached its maximum height.

Another group decided on the easier (and safer) option of using the GLX and motion sensor to capture the horizontal acceleration of the dart when launched off of the table to model a Type 1 Projectile Motion problem. This method reduced a lot of uncertainty in their calculations since the sensors could accurately capture their data and they had the added benefit of not needing to precariously stand on a chair and guess-timate the maximum height. They also managed to finish a lot earlier and have more experimental runs than we did.

Although the sensors did end up making the experiment a lot easier for them, both of our groups were able to make connections between units and truly use the scientific method which made the experiment so much more interesting than our usual structured inquiry labs.

How You Can Support Inquiry Learning in Your Classroom

From these studies it is clear that inquiry-based learning and technology in STEM classrooms have short-term benefits such as increasing student interest and confidence. In addition, these two approaches to learning are complimentary to each other. The ease of use from technology decreases wait times and allows students to move at their own pace. Because students can move at their own pace, they are able to ask questions about the experiment itself. Students are able to benefit from making mistakes in this environment because the data logging software allows them to analyze what they did incorrect and why it is happening.

Through this approach, students are able to be curious in a controlled environment whilst developing essential scientific inquiry skills. There is also more time for meaningful discussion during class through using probeware since it reduces the amount of set up and lessons on how to use the equipment. Because of this, students are less likely to get frustrated or bored from experiments and helps students understand or reinforce their knowledge in the subject. This could improve the number of students pursuing a science education since students are less likely to leave if they are interested and confident in what they are learning.

PASCO and AYVA have a significant amount of resources that further demonstrates the positive impact that probeware technology has in science education such as White Papers on how PASCO supports scientific inquiry. AYVA also provides Curriculum Correlations for Canadian provinces which provides suggestions on how to incorporate PASCO technology into science classrooms across Canada.

 

References

Hemraj-Benny, T., & Beckford, I. (2014). Cooperative and Inquiry-Based Learning Utilizing Art-Related Topics: Teaching Chemistry to Community College Nonscience Majors. Journal of Chemical Education, 91, p. 1618-1622

Priest, S.J., Pyke, S.M., & Williamson, N.M. (2014). Student Perceptions of Chemistry Experiments with Different Technological Interfaces: A Comparative Study. Journal of Chemical Education, 91, p.1787-1795.

Tanahoung, C., Chitaree, R., Soankwan, C., Sharma, M.D., & Johnston, I.D., (2009). The effect of Interactive Lecture Demonstrations on students’ understanding of heat and temperature: a study from Thailand. Research in Science & Technological Education, 27(1), p. 61-74.

Vannatta, M.W., Richards-Babb, M., & Solomon, S.D. (2010). Personal Multifunctional Chemical Analysis Systems for Undergraduate Chemistry Laboratory Curricula. Joural of Chemical Education, 87(8), p. 770-772.

Having the Right Attitude Towards STEM

In my high school years I found that many of my classmates hesitated in pursuing science and engineering because of the ‘M’ in STEM. Math. When I was younger I didn’t really understand why everybody hated math so much – in my opinion it was more fun than having to draw (I’m a pretty bad artist). It also helps that I had a good teacher in grade 5 and 6 that gave me a healthy respect for math. Her math tests were infamous for being long and difficult but it helped me develop the necessary skills to succeed in high school.

I find that the biggest issue for students is that they have a negative view towards studying STEM and it’s a result of years of conditioning from teachers, parents, and peers telling them that the content is difficult to learn. Although it is not intentional, it has a significant effect on a student when they start thinking about what career they want to pursue.

EEK IT’S A PARABOLA! Oh wait it’s just a ghost.

Although Math is its own discipline in STEM, all the other disciplines (science, technology, and engineering) inevitably involves math in some way. So many students have a fear of math and will avoid certain disciplines because it requires math. Quite often I would hear my classmates say that they won’t apply to a specific post-secondary program because it requires grade 12 calculus. This fear of math is so prevalent in our culture that it is almost like a badge of honour to say that you’re “not a math person”. My first year calculus professor has a good blog posts (here and here) that outlines why math anxiety can be detrimental and has other math resources and activities for teachers.

This applies for teachers as well – showing fear of math or any other subject can greatly affect how a student perceives that subject. In order to address this problem, STEM education for pre-service teachers must be improved. In one study by Gado, Ferguson, and van’t Hooft (2006), pre-service chemistry teachers were taught using probeware in their experiments which resulted in greater confidence in these subjects. By having more confidence in teaching the content, the teachers are less likely to project a fear of STEM but instead an interest and enthusiasm for the subject.

Using mathematical concepts in science is an effective way to make math seem less like a scary ghost. There are many ways to help your students reinforce their math skills within science lessons. With the use of probeware with built-in graphing software, math can be readily applied to real-life concepts thus helping students understand concepts both numerically and visually. It also explains math in a different way that some students may find more understandable.

Failure Is Not An Option (Or Is It?)

I think this negative attitude towards math and difficult subjects in general comes from the fear of failure. Acceptance into post-secondary education heavily relies on what grades students have and having a low score in a course could influence whether or not they get into a certain university program. I admit that I didn’t want to take physics or calculus because I knew that it would lower my acceptance average since they were quite difficult subjects.

What I learned from these courses was far more valuable to me than a few percentage points and I’m not talking about derivatives and quantum physics. I learned how to fail in physics and calculus. I did have a fear of failure – the thought of even getting a 70 in a course was terrifying for me until grade 11. Learning new things was always easy for me and failure was never an option for the overachieving 16 year old me.

I failed a test in high school for the first time in my grade 11 physics class which was absolutely devastating. After some tears I picked myself up and tried to figure out where I went wrong. Obviously my study skills at the time weren’t effective so I had to develop different skills that would suit this type of course. I learned from my mistakes and tried harder. I ended up finishing that class with a 90 and an important life lesson. I learned that failing is okay as long as you learn from your failures. This is something that I didn’t really understand until I actually experienced it.

Although something is considered difficult or you think that you might not be good at it, it shouldn’t prevent you from at least trying. There is always something to learn from failure, even if it’s simply the confirmation that something is definitely not suited for you. This applies not only to STEM but in life.

In order for more students to pursue a STEM education, we need to start encouraging students to get out of their comfort zone and challenge themselves in areas that they are not as strong in even if they may fail. Remember, failure is an option!

References:

Gado, I., Ferguson, R., & van’t Hooft, M. (2006). Using handheld-computers and probeware in a Science Methods course: preservice teachers’ attitudes and self-efficacy. Journal of Technology and Teacher Education, 14(3), p. 501+.

Stoked About Stoich

Stoichiometry – No Limits to Limiting Reactants

If there’s one thing virtually all chemistry teachers can agree on, it’s that stoichiometry is a difficult topic for students. A problem can involve writing chemical formulas, balancing equations, then multistep calculations converting amounts from grams to moles and back again. Just writing those sentences helps me understand why students struggle! On top of all of this, we also ask our students to identify limiting reactants and determine percent yield for an experiment.

There are a number of tools and methods teachers employ to get students through this tough topic, including flow charts, algorithms, the Before Change After (BCA) approach, and physical models to reach students. We even use analogies of bikes, cookies or hamburgers to make limiting reactants relatable.

Hands-on inquiry can be another practical and tangible tool. A simple experiment using household chemicals, a bottle (or flask) with a stopper and tubing, and a Wireless Pressure Sensor can give students the opportunity to easily change the amount of one reactant while quickly measuring the amount of product to see the limits of the limiting reactant.

In this experiment from our Essential Chemistry Laboratory Investigations book, students perform multiple trials, keeping the amount of baking soda (sodium bicarbonate – NaHCO3) constant while increasing the amount of citric acid (C6H8O7). To keep the procedure simple, dissolve sodium bicarbonate in water to make a 0.12 M solution. Don’t worry if you haven’t covered molarity yet – let the students know that for 1000 mL of solution, there are 10.24 g of NaHCO3. Then, when they use 40 mL of sodium bicarbonate solution for each trial, they can practice proportional reasoning to determine that there are 0.41 grams of sodium bicarbonate are in each sample.

They should mass 0.10 grams of citric acid after they add 40mL of NaHCO3 solution to the reaction vessel. After connecting the Wireless Pressure Sensor to SPARKvue and opening lab 8D in the Essential Chemistry folder, students can start data collection. Once they establish a baseline pressure they should add the citric acid and quickly stopper the bottle. Make sure one student in the group is firmly holding the stopper in place while swirling the bottle during data collection.

Once the reaction is complete, it’s time to analyze the data!

The change in pressure is based on the gas produced during the reaction.

Next, it’s time to repeat the experiment, but with 0.20 g of citric acid. If you ask the students to predict what will happen to the pressure most will (correctly) assume that the change in pressure will double since they have twice as much reactant. They can do the same with 0.30 g of citric acid.

Something funny starts to happen when 0.40 g of sodium bicarbonate is added. The change in pressure is not four times the 0.1 g sample. And when 0.50 grams of sodium bicarbonate is added, it is the same change as 0.40 g. How can this be?

They can graphically analyze this discrepant event this by plotting the change in pressure vs the mass of sodium bicarbonate and viewing all of 5 of the data runs.

Some students will realize that the later trials did not produce proportionally higher changes in pressure because there was not enough sodium bicarbonate to react with all of the citric acid. This is a great observation and the key to understanding limiting reactants. They have made the connection that something will run out and stop the reaction!

Based on the graphs, the third trial is closest to an ideal ratio of reactants. In trials 4 and 5, there is not a proportional increase indicating that some of the citric acid did not react. To explain this, they need to dig deeper into the data and convert masses of reactants into moles.

Looking at the third trial, they have 0.41 grams of sodium bicarbonate, and 0.30 grams of citric acid. Using the molar masses of NaHCO3 and C6H8O7, they can calculate that there are 0.0049 moles and 0.0016 moles respectively. This is a 3:1 ratio.

To put all the pieces together, one more bit of information is needed– the balanced equation!

3NaHCO3(aq) + C6H8O7(s) → Na3C6H55O7(aq) + 3H2O(l) + 3CO2(g)

There’s the reason for the 3:1 ratio of moles of sodium bicarbonate and citric acid! Anytime the reaction has something other than a 3:1 ratio of the reactants, one of the reactants limits the production of gas. Now they can then look at each of the trials, identify which reactant is limiting, and provide evidence to support their claim!

This simple experiment with household chemicals gives students the experience and data to understand the limits of a limiting reactant, how the limiting reactant can change based on the amounts of substances, and why simply adding more of a reactant does not always lead to more product. Armed with these understandings, there will be no limit to their success!

The Cost of a STEM Education

Another major factor is simply the cost of a science and technology education – you can’t learn computer science without a working computer!

Technology has shaped education and how students learn – many teachers are opting to use online assignment submission, encouraging students to download lessons from a school website, and communicating to their students via Twitter. I still remember going to the computer lab with my class to play Math Circus, a series of circus mini-games geared to teach children math.

There are also so many free resources available for educators that can supplement their lessons and help students. Many of these resources are available through an app on a mobile platforms but what about schools and communities that don’t have the funds to access such technology?

Some schools have a Bring Your Own Device program to save the cost of buying a class set of tablets or laptops. Some schools discourage this program because it is not guaranteed that all students will have a device so they will purchase their own technology.

Technology Supports Inquiry Learning:

Whilst technology may have been a ‘want’ ten years ago, now it is a ‘need’ for educators as more provinces and school boards make 21st Century learning skills and inquiry skills a requirement for classrooms.

Inquiry-based learning is a pedagogy that is focused on learning using constructivism, which involves an individual’s participation to facilitate their own learning. In other words, a student must be engaged, actively thinking, asking questions, making connections between their knowledge and real-life examples, and use hands-on activities to concretize their theoretical knowledge (Minner, Levy, and Century, 2010, p. 476-476). In fact, inquiry-based learning has been shown to improve grades in physical science courses for non-STEM students (Hemraj-Benny and Beckford, 2014).

Inquiry learning is a fundamental aspect of science education since the nature of the subject is to ask questions and use what you know to develop a way to answer your question.

Even if a school can afford computer carts or tablets, there are recurring costs in a science department.  In a science department equipment such as glassware, reagents, and rats for dissection must be replenished every year in order to do experiments.

Experiments support a student’s inquiry skills which are important for a budding scientist but with the high cost associated with science experiments, how can students learn?

As previously mentioned in another blog, I struggled to understand physics so I only fully grasped it when I did the experiments. I was lucky to have a teacher that did an experiment at the end of every unit and to be in a well-equipped physics classroom with an air track, metal carts, optics equipment, and PASCO sensors. I cannot imagine passing my high school physics classes if I didn’t have the resources available.

What Can We Do?

There are many government funded outreach programs that bring science experiments to your classroom for free. Quite often, university students volunteer to visit the classroom for a workshop and they will bring all the necessary equipment to perform an experiment.

In my school we frequently had visitors for McMaster science and engineering outreach programs to do a specific experiment for that day. During one of these visits, each group of students were able to build their own circuit and create a solar car that we later tested outside.

There are many programs like this all around Canada and a lot of them are affiliated with a post-secondary institution so it can double as a career-planning workshop for your students. One of the biggest outreach programs and an incredible resource for science educators in Canada is Let’s Talk Science. Let’s Talk Science conveniently provides a page dedicated to finding a local outreach:

In terms of technology, there are a lot of grants available from some of the biggest companies in Canada such as the Best Buy School Tech Grant which also has a specific STEM school category and the Staples Superpower Your School Contest for environmentally conscious schools. Check out our AYVA grant page to see what’s available!

 

References:

Hemraj-Benny, T., & Beckford, I. (2014). Cooperative and Inquiry-Based Learning Utilizing Art-Related Topics: Teaching Chemistry to Community College Nonscience Majors. Journal of Chemical Education, 91, p. 1618-1622

Minner, D.D., Levy, A.J., & Century, J. (2010). Inquiry-based science instruction—what is it and does it matter? Results from a research synthesis years 1984 to 2002. Jouurnal of Research in Science Teaching, 47(4), p.474-496.

Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)